Maytag Atlantis Washer Not Spinning. I have about a 10 year old maytag atlantis washing machine and it's been doing fine until today. Look at the dial selection to make sure you have selected the proper spin speed for the material you are washing.
Top 10 Reviews of Maytag Atlantis Series from mythreecents.com
I have about a 10 year old maytag atlantis washing machine and it's been doing fine until today. To test the lid switch, you’ll need a multimeter. Locate the lid switch (check your manual if necessary).
Also, It Makes A Loud Bang At The End Of The Spin Cycle.
One of the most common reasons for a maytag top load washer not spinning is an incorrect wash cycle or spin setting. To determine if the lid switch assembly is defective, use a multimeter to test the lid switch for continuity. She then tried latter to wash a small load and it seemed to work fine.
I Thought It Might Be The Belt Since Before I Tilted It Up To Look I Could Still Feel The Motor Turning.
It will not spin the tub after the rinse cycle, but it will go back in forth to agitate. To test the lid switch, you’ll need a multimeter. Next, gain access to the top of the washer by removing the top cover.
My Maytag Atlantis 7504 Washer Won't Spin, The Water Drains, It Agitates, Clothes Are Too Drippy To Put In Dryer.
So, if your mav8551aww washer drains the water but will not spin, pumps but doesn't spin during spin cycle or pumps the water out but won't spin, the following info will help you identify the problem. Gentle, handwash, or delicate settings utilize slower spin speeds for more fragile fabrics. Make sure the power is switched off.
He Replaced The Belt But Said He Cannot Spin The Drum By Hand.
The lid switch assembly prevents the washer from spinning when the lid is open. I have about a 10 year old maytag atlantis washing machine and it's been doing fine until today. Soapy water is found after cycle is complete.
But, Unfortunately When I Checked, The Belt Underneath.
First, unplug the washer from the power outlet and disconnect it from any water source. If the lid switch assembly fails, the washer will not spin. Locate the lid switch (check your manual if necessary).
