How Do You Clean The Filter On A Frigidaire Dehumidifier. Turn the tank over in a bathtub or sink to drain any water out from the bottom. There is a little resistance, but the cover will detach.
Frigidaire FAD704DWD 70 Pint Fan Dehumidifier (2 Pack from www.walmart.com
The steps of cleaning a dehumidifier filter. Use this solution to wipe down both sides of the filter, using a soft sponge or a microfiber cloth. Reset the filter reminder timer by pressing the button for 3 seconds.
When The Filter Is Clean, Replace The Soapy Water With Clean Water And Wipe Down The Filter Again To Remove The Excess Detergent.
1 unscrew the screws holding the top panel in place; 2 pull the top panel away from the body of the dehumidifier; Reset the filter reminder timer by pressing the button for 3 seconds.
4 Replace The Top Panel.
Then pull the filter out of the unit. Once you remove the main reservoir, you will find the filter placed directly above the main water supply in a vertical position. Turn off your dehumidifier and unplug it.
Clean The Filter With Warm Soapy Water.
Rinse well and allow to dry complete before replacing. Download a copy of the owner's manual. To clean the filter, open the front panel and remove.
Clean The Filter With Warm, Soapy Water.
This feature is a reminder to clean the air filter (refer to care and cleaning section of the use and care guide) for more efficient operation. If using a dehumidifier on a moderate or medium setting then clean the filter of the dehumidifier once every two or three weeks. It is the best fungal killer with the potency to destroy molds and mold spores in no time.
Remove The Filter According To The Instructions In The Owner's Manual.
Turn the tank over in a bathtub or sink to drain any water out from the bottom. Once you’ve cleaned the filter a few times you will know how often you should clean it. You should let the filter soak for at least half an hour, though you can also leave it for an hour or more.
